Vicon V960D Series Guide d'installation télécharger pdf (Page 6)

Network Connector

The V960D connects to the network via a standard network cable and automatically detects the speed

of the local network segment (10BaseT/100BaseTX Ethernet). This socket could also be used to

power the V960D via Power over Ethernet (PoE). The camera auto-senses the correct power level

when using a PoE switch, router or injector.

2. Power Connector

12 VDC or 24 VAC screw terminal power connector.

3. I/O Terminal Block for Audio and Alarm

3.1 Audio In

Audio in (line level), for line-in mono signal (only left channel is used from a stereo signal)

3.2 Audio out

The Audio output (line level), which could be connected to a line output of a microphone system

or an active speaker with a built-in amplifier.

3.3. Alarm In

One analog (dry contact) alarm input.

3.4 Alarm Out

One relay output (2A: 120 VAC/60 VDC).

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Pas de commentaire

Vicon V960D Series Guide d'installation Page 6