Vicon V960D Series Guide d'installation télécharger pdf (Page 34)

How to Assign an IP Address

Default setting is set to “DHCP” and “UPnP” function is set to ON. If your network has a DHCP server

and the UPnP function is enabled on your PC, you can find the camera in “My Network”. Refer to the

Multi Upgrade Tool manual for detailed instructions.

Execute the Multi Upgrade Tool (from the Installation CD); it will search cameras on the network

automatically.

1) After the list of detected devices appears, select the camera you are trying to configure.

2) Select the Network type as Static or DHCP. If Static is selected, enter all of the network

information for your camera.

3) Select the “Change IP Address” button. The message “Do you want to change IP address?” will

display; select “Yes” from the pop-up window.

4) Check the Type as Static or DHCP from the list.

When you double-click the camera within the list, the default web browser (Internet Explorer or

compatible equivalent) will open and automatically connect to the camera.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Pas de commentaire

Vicon V960D Series Guide d'installation Page 34