Vicon CE202D-WN Guide d'installation télécharger pdf (Page 61)

• NAT traversal Setting

- Enable: Click the Enable button to enable NAT traversal; pressing the button toggles

between enable and disable. When enabled, the network camera attempts to configure port

mapping in a NAT router on your network, using UPnP. Note that UPnP must be enabled in

the network camera (see System>Network>UPnP).

Enter a NAT router and enter the external port number for the router in the field provided.

If you enter o in those fields, the network camera automatically searches for NAT

routers on your network.

Notes:

- If you attempt to manually enter a port that is already in use, an alert message will be displayed.

- When the port is selected automatically it is displayed in this field. To change this enter a new

port number and click Save.

When the settings are complete, click Save, or click Reset to revert to previously saved settings.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 78 79

Pas de commentaire

Vicon CE202D-WN Guide d'installation Page 61