Vicon CE202D-WN Guide d'installation télécharger pdf (Page 16)

3.5 Network Camera Setup

This section describes how to configure the network camera and is intended for product

Administrators, who have unrestricted access to all the Setup tools, and Operators, who have access

to the settings for Basic, Live View, Video & Image and System Configuration.

The network camera is configured by clicking Setup in the top right-hand corner of the Live View page.

Click on to access the online help that explains the setup tools.

When accessing the network camera for the first time,

the “Admin Password” dialog appears. Enter your

admin name and password, set by the administrator.

Note: If the password is lost, the network camera must

be reset to the factory default settings. See “3.8

Resetting to the Factory Default Settings”. The default

administrator username is “ADMIN” and password is

“1234”.

3.5.1 Basic Configuration

The device information is displayed on this Basic Configuration page.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 78 79

Pas de commentaire

Vicon CE202D-WN Guide d'installation Page 16