Vicon Roughneck V920D Series Guide d'installation télécharger pdf (Page 41)

 Alarm In

Select “Enable alarm in port 1” to activate the alarm event. The network camera supports 1 alarm

input port.

- Type: Choose the type of alarm to use from the drop-down list, NO (Normally Open) or NC

(Normally Closed).

- Dwell Time: Set the dwell time an event lasts from the point of detection of an alarm input.

When the settings are complete, click Save, or click Reset to revert to previously saved settings.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 81 82

Pas de commentaire

Vicon Roughneck V920D Series Guide d'installation Page 41