Vicon SVR-P Guide de l'utilisateur télécharger pdf (Page 18)

Digital Video Recorder User Guide

5.ConnecttheSMPS(switchedmodepowersupply)powercable.

6.ClosetheuppercoverontheSVR-1670,andthenreconnectalldevicesthatwereremovedfor

the hard drive installation.

Now,itistimetocongureandactivatetheharddiskdrive.

Figure 3.6.5 Connecting SMPS Power Cable (Change the Image)

Figure 3.6.6 The SVR-1670 Connected with Maximum Number of HDDs

Chapter 3. Hardware Installation

Enabling a Hard Disk Drive

Toenablethenewlyattachedharddiskdrive,youmustchangeitsavailabilityto"O"onthe

SVR-1670’sDiskManagermenu.

1.FromtheOSD,selecttheSystemSettingsmenu.

2.SelecttheDisksubmenu,andthen,onit,selectDiskManager.

-ThenewlyinstalledharddiskdriveappearsinthelistalongwithOandXundertheState

category.

3.TochangetoEnabledstatus,selecttheharddiskdrivetoconnectandthenpressESCtoexit

theDiskSelectionmenu.Toenabletheharddiskdrive,selectAddandthenpressEnter.You

can add the hard disk drive to store data.

Figure 3.6.7 Disk Manager Menu Showing Disabled Hard Disk Drive

Figure 3.6.8 Disk Manager Menu Showing Enabled Hard Disk Drive

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 64 65

Pas de commentaire

Vicon SVR-P Guide de l'utilisateur Page 18