Vicon SVR-P Guide de l'utilisateur télécharger pdf (Page 17)

Digital Video Recorder User Guide

3. Turn on the hub or router.

4.TurnontheSVR-1670.

To prevent damage to the SVR-1670, wait to turn the power on until after you have connected

the Ethernet cable.

Always turn off the SVR-1670 and unplug the power cable before you attach or remove a hard

disk drive. Disconnect any devices that are connected to an external power source.

This section describes how to work with a hard disk drive, in the following subsections :

•InstallingaHardDiskDrive

•EnablingaHardDiskDrive

•RemovingaHardDiskDrive

•DisablingaHardDiskDrive

3. 6 Hard Disk Drive Installation

Installing a Hard Disk Drive

1.Opentheuppercoveroftheproduct,andthenremovethefourscrewsthatconnectthehard

disk drive bracket and main unit.

Figure 3.6.1 Removing Screws that Connect the SVR-1670 & Hard Disk Drive Bracket

Chapter 3. Hardware Installation

2. Lift up the hard disk drive bracket, and then insert a hard disk. Fasten the disk to the bracket

usingtheenclosedxturescrews,asshowninthepicturebelow.

3.ReattachtheharddiskdrivebrackettotheSVR-1670mainunit.

4.Oncethebracketissecurelyattached,connecttheSATAcable.

Figure 3.6.2 Inserting Hard Disk to the SVR-1670

Figure 3.6.4 Connecting SATA cable

Figure 3.6.3 Reattaching Hard Disk Drive Bracket to the SVR-1670

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 64 65

Pas de commentaire

Vicon SVR-P Guide de l'utilisateur Page 17