Vicon V992D-N4 Guide d'installation télécharger pdf (Page 23)

3) Select the “Change IP Address” button. The message “Do you want to change IP

address?” will display; select “Yes” from the pop-up window.

4) Check the Type as Static or DHCP from the list.

When you double-click the camera within the list, the default web browser (Internet Explorer

or compatible equivalent) will open and automatically connect to the camera.

4.6.2 Service Port

Service Port

HTTP port

The default HTTP port number (80) could be changed to any port within the valid port

range (1-65535). This is useful for simple port mapping.

RTSP port

The RTSP protocol allows a connecting client to start an H.264 stream. Enter the RTSP

port number to use. The default setting is 554.

NOTE: After changing the default port numbers, the user can use the ‘Multi Upgrade Tool’ to

search and connect automatically if they can’t remember the specific port numbers

that they used.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 33 34

Pas de commentaire

Vicon V992D-N4 Guide d'installation Page 23