Vicon CE102D Guide d'installation télécharger pdf (Page 24)

 AE & AWB

• Exposure control

This page provides access to the advanced exposure control settings for the network camera.

- Mode: Supports exposure modes to control the amount of light detected by the camera

sensor based on settings for light conditions. The default setting is Auto mode.

* Automatic: Automatically sets the amount of light detected by the image sensor.

* Hold Current: Fixes the exposure at its current state.

- Value: Select a value in the drop-down list to tune the exposure. The default setting is 5.

- AGC: Select a value in the drop-down list to specify the level according to the screen

luminance. The default setting is 30dB.

- Enable Backlight Compensation: Set this checkbox to activate the BLC operation.

- Enable Flicker free: Set this checkbox to activate the flicker free operation.

- Flicker Mode - Provides the options for flicker.

* 50Hz: Select at 50 Hz environments.

* 60Hz: Select at 60 Hz environments.

- Enable Long Exposure: Set this checkbox to activate the electronic shutter of the camera.

* Max. Shutter: Select a shutter speed value in the drop-down list. The default setting is 1/15.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 70 71

Pas de commentaire

Vicon CE102D Guide d'installation Page 24