Vicon CE202D-WN Guide d'installation

www.vicon-security.com XX269-10-00CE202D-WN Network Outdoor Camera DomeVicon Industries Inc. does not wa

10 The protocol drop-down list allows the selection of the combination of protocols and methods to use depending on your viewing r

11 • Adjusting Pan and Tilt: Click the navigation button in the PT control panel. Pan Control: ►(Right), ◄(Left) Tilt Contro

12 3.6 Resetting to the factory default settings To reset the network camera to the original factory settings, go to the Setup>System> Mainten

SN663V IP Camera Dome Rev.A Vicon Industries Inc.Internet Address: www.vicon-security.com

2 1. Description The information in this manual provides quick installation and setup procedures for the CE202D-WN Camera Dome. These units should o

3 Note 1: Check your package to make sure that you received the complete system, including all components shown above. Note 2: Adapter for 12 VD

4 2. Installation • Camera Installation Carefully remove the contents from the box, and verity that nothing was damaged in shipment. 1) Using

5 2.2 Connections  Connection Cable NO Name Description 1 Audio Cable Audio line output, RCA Jack 2 Power Cable Red: 12 VDC Wh

6 • Connecting to the RJ-45 Connect a standard RJ-45 cable to the network port of the network camera. Generally a cross-over cable is used for

7 2.3 Network Connection and IP assignment The network camera is designed for use on an Ethernet network and requires an IP address for access. Most

8 3. Operation The network camera can be used with Windows® operating system and browsers. The recommended browsers are Internet Explorer®, Safari®,

9 3.2. Access from the internet Once connected, the network camera is accessible on your local network (LAN). To access the network camera from the