Vicon CE202D-WN Guide d'installation télécharger pdf (Page 11)

• Adjusting Pan and Tilt:

Click the navigation button in the PT control panel.

Pan Control: ►(Right), ◄(Left)

Tilt Control: ▲(Up), ▼(Down)

3.5 Network Camera Setup

This section describes how to configure the network camera and is intended for product

Administrators, who have unrestricted access to all the Setup tools, and Operators, who have access

to the settings for Basic, Live View, Video & Image and System Configuration.

The network camera is configured by clicking Setup in the top right-hand corner of the Live View

page. Click on to access the online help that explains the setup tools.

When accessing the network camera for the first time, the

“Admin Password” dialog appears. Enter your admin name and

password, set by the administrator.

Note: If the password is lost, the network camera must

be reset to the factory default settings. See “3.6

Resetting to the Factory Default Settings”. The default

administrator username is “ADMIN” and password is

“1234”.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Vicon CE202D-WN Guide d'installation Page 11