Vicon V992D-N4 Guide d'installation

www.vicon-security.com XX248-50-01V992D-IR Indoor Network Dome Camera with IR LEDsVicon Industries Inc.

83. Live View Digital Zoom Snap Shot Full Screen Video Stream change: First stream  Second stream Play: Click this button by manually

9• Multicasting is bandwidth-conserving technology that reduces bandwidth usage by simultaneously delivering a single stream of information to multip

104. Setup The V992D-N4 is configured from the Setup link, which is available on the top left hand side in the web interface. This configuration c

114.2 Video The following descriptions show examples of some of the features available with V992D-N4. 4.2.1 Codec This section allows you to

12Size Video output resolution. See the output resolution table that follows. Frame rate 1 ~ 30fps (60Hz) / 1 ~25fps (50Hz) GOP Size 1 ~ 60

13< Output resolution and Frame rate table for V992D-IR > (Unit: fps) First Stream Second Stream 1920x1080 704x480 640x480 640x360 640x

14AUTO: Use this setting for automatic exposure control. MANUAL: Use this setting to control V992D-IR exposure manually. To compensate for poor light

154.3 Live V992D-N4 can support up to 10 simultaneous users via unicast. 4.3.1 Viewer Setup Live View Protocol RTP Unicast (UDP) / RTP over R

16 Select the Area and Color for the mask and use the mouse to drag the cursor to fill the area to be set as a Privacy Mask. Click Save and then c

174.4.FTP 4.4.1 Config Server Configuration Allows transmission of still images to remote sites using the FTP server. Set the information for

Contents1. PRODUCT FEATURES... ... ...

18Directory The name of the directory where the still images will be stored when an Event occurs. File Prefix You may add a file name prefix to

19Interval It allows for saving still images based on frequency (1 image every 10 sec, for example). Use the drop-down control to set from 10 sec

20 NOTE: Using the motion detection feature will consume more of the V992D-IRs resources, and this could decrease the V992D-IR’s overall performance,

21NOTE: IP address assignment via DHCP may lead to the situation where the IP address changes and you lose contact with the V992D-IR. If your DHCP se

22network information for your V992D-IR. 3) Select the “Change IP Address” button. The message “Do you want to change IP address?” will display

234.6.3 E-mail You must turn Notification to ‘On’ and then enter the host names or addresses for your mail servers in the fields provided to enabl

244.7.1 User When you access the V992D-IR, the Configure Root Password dialog box appears. Enter the default user name ADMIN and password 1234 to l

254.7.3 Maintenance System Name Choose a system name to identify the V992D-IR when using e-mail notifications. System Reboot Reboots the V992D-

26Firmware Update Procedure 1. Save the firmware file to your computer. 2. Go to Setup > System > Maintenance within the V992D-IR web brows

274.7.4 Information System Information Confirm the system information of the V992D-IR: S/W version/Model Name/MAC address/IP address settings.

11. Product Features The V992D-IR is a high performance H.264 indoor network domecamer V992D-IR, designed for security installations. It delivers cr

28 6. Dimensions

29

30 Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has

31 Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.

32Vicon Standard Equipment Warranty Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and workmanshi

22. Installation 2.1 Remove Dome Cover Turn counterclockwise the dome cover by grasping the bottom of the camera. Adjust Image Position The

3 Mounting to a ceiling / wall IN CEILING MOUNT

4 SURFACE MOUNT

5 2.1 Assign IP address The default setting of the V992D-IR is set “DHCP” to ON. If you have a DHCP server on your network and UPnP function enabl

6 2.3 Access from a browser 1. Start a browser (i.e., Internet Explorer) 2. Enter the IP address or host name of the V992D-IR in the Location/Addr

7 NOTE: The layout of the live view page in the V992D-IR may have been customized to meet specific requirements. Consequently, some of the examples a