Vicon SVFT-W23 Manuel d'utilisateur télécharger pdf (Page 4)

Product Speciﬁ cation

Model No:

SurveyorVFT

Product Code:

See Table 1

SEC: 3

SPEC:

V134-25

REV: 409

Vicon Product Facts

The SurveyorVFT IP Camera Dome can be connected to any ViconNet network. Existing Kollector Elite Recorders and ViconNet Workstations

can be used to live view and record its network-streamed video. A network can be as simple as a single SurveyorVFT Camera Dome connected

to a ViconNet Workstation or can be complex with the addition of several networks interconnected via WAN.

When adding a SurveyorVFT IP Camera Dome to the ViconNet network, the following items must be considered:

• The number of cameras on a switch with respect to switch capabilities and system bandwidth mapping.

• Bandwidth limitations on ports connected to workstations (using 100 or 1000 Mbps).

• Workstation capabilities such as processing speed and disk write speed.

• Storage size and location types including local Workstation recording, attached SCSI RAID and integrated NAS/SAN devices.

Refer to the network diagrams on the next page for sample conﬁ gurations.

Basic video bandwidth performance can be seen below. This chart shows a SurveyorVFT at 30 FPS with varied quality settings and video

motion environments. 30 FPS is the maximum video frame speed from the SurveyorVFT. Lower frame speeds can be attained down to 1 FPS.

Bandwidth calculations can be scaled down from the chart data*. For example:

A SurveyorVFT set at 10 FPS would be expected to have a bandwidth of 0.5 Mbps at Q5 and in a High video motion environment.

NETWORK CONSIDERATIONS

Bandwidth Chart

*Actual FPS from IP device might vary in extreme motion (i.e., autopan) and multiple viewer conditions.

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Vicon SVFT-W23 Manuel d'utilisateur Page 4