TCP/IP, Fiber and Twisted-Pair
High-Performance Camera Dome
• Composite video standard, available with
TCP/IP, fiber and UTP transmission card
options
• ViconNet (Version 3) (TCP/IP) converts to
digital video for viewing and control on
Kollector Elite and Pro Digital Video
Recorders and ViconNet workstations
• Fiber-optic option transmits video and
control data to fiber optic receivers over long
distances
• UTP option transmits video up to 3000 ft over
unshielded twisted pair
• Lowest current draw in its class
• DIP-switch selectable competitive camera
dome protocols eliminate the need for
external translators
• On-board memory retained in housing;
designed for easy installation and servicing
• 360° continuous rotation pan-and-tilt drive
with a variety of color domes available
• Color 22X, 22X with ExView™, day/night 23X
and 35X camera options, maximum 420X
optical/digital zoom
• EIS (image stabilizer) on 35X model
• Indoor or outdoor, ceiling or pendant
configurations
• Digital Slow Shutter feature for enhanced
low-light applications
• Wide Dynamic Range (23X and 35X) provides
best contrast for high quality images
• Outdoor version provides environmental
protection, pressurized (PRS) and maximum
security (M) versions available
• Convenient integration into any existing
CCTV matrix system
• GUI provides configuration of all features
SurveyorVFT Camera Dome System is a compact, lightweight
and intelligent security device comprised of a camera, pan/tilt
drive, receiver and CPU-based electronics all in an attractive
and covert enclosure. SurveyorVFT can be programmed and
operated using any V1300X/V1400X/1500 series of NOVA™
communication devices and enhanced VicoaxII protocol. It is
available in a variety of indoor and outdoor versions and can be
configured with a variety of camera and lower dome types.
Refer to Table 1.
The basic SurveyorVFT provides video transmission ove
coaxial cable. Options are available that provide TCP/IP
(ViconNet), fiber-optic and twisted-pair (UTP) video
transmission. Each of these options includes an interface board
that allows the specific type of video transmission. An
appropriate receiver is required.
The ViconNet (version 3) option provides support for network
connection to Kollector Elite Digital Video Recorders and
ViconNet Workstations via ViconNet software. A pre-installed
LAN interface board allows direct plug-in to a system network
switch. Video from the camera is available to all network
recorders and workstations for live view and recording.
The Vicon SurveyorVFT camera dome can be used in
conjunction with competitive PTZ drivers through DIP-switch
selection.
The SurveyorVFT is designed for easy snap-in installation. The
drive simply snaps into the housing. When removed, the
housing retains all programmed functions in its on-board
memory. The customer interface board snaps down for easy
access and the PCB provides removable terminal blocks fo
simple wiring connections. The SurveyorVFT has one of the
lowest current draws compared to other domes in its class.
There are four camera types available, each with NTSC and
PAL versions. The basic model is a 22X high-resolution
camera/lens (CA in the model number). Another 22X model is
available with ExView CCD technology (22XEX). The third
version is a 23X day/night camera/lens and the fourth is a 35X
day/night camera/lens. The day/night models feature wide
dynamic range (WDR). See Technical Information and Table 3
for camera features. Several mounting accessories are
available to fit almost any installation need. Refer to Table 1 fo
specific SurveyorVFT models and mounting options.
There are 79 programmable preset positions, each having a
variable preset solve accuracy of 0.1º. Programmable azimuth
and compass is displayed on screen. There are 8 compass
headings (N, NE, E, SE, S, SW, W, NW) (22XEX/23X/35X
only) and pan and tilt degrees displayed with a 1º resolution. 16
individual programmable privacy masks are available. Motion
detection capability is available on day/night models. For each
preset, there are 6 programmable zones for motion detection,
each having 3 sensitivity levels.
larm inputs can be individually programmed. Programmable
titling is provided for the camera and every preset position,
alarm, relay and sector and titles can be enabled or disabled
individually or globally.
Eight tours (4 on 22X) are available with 32 steps per tour. Pan
and tilt functions are externally controlled, continuously variable
and programmable to be enabled or disabled. There is a
programmable autopan function.
Product Specification
Model No:
SurveyorVFT
Product Code:
See Table 1
SEC: 3 SPEC: V134 REV: 1106
Vicon part number 8009-7134-02-03 Product specifications subject to change without notice.
1
Commentaires sur ces manuels