Vicon V992-N Guide d'installation

www.vicon-security.com XX248-00-00V992-N Network CameraVicon Industries Inc. does not warrant that the f

8 4.1.1 Installation Setup Installation Mode allows use of the analog BNC output from the camera to connect the camera NTSC, PAL: Analog Output is

9 bandwidth usage to be controlled. CBR (Constant Bit Rate) is used to achieve a specific bit rate by varying the quality of the H.264 stream. While

10 < Output resolution and Frame rate table for V992-N > (Unit: fps) RESOLUTION Table Second Stream 720p 4CIF 4CIF* VGA 4:3 VGA 16:9

11 To compensate for poor lighting conditions, you can adjust the Color level, Brightness, Sharpness, Contrast and Exposure control. NOTE: When AE is

12 4.3 Live V992-N can support up to 10 simultaneous users via unicast. 4.3.1 Viewer Setup Live View Protocol RTP Unicast (UDP)/RTP over

13 4.4.FTP 4.4.1 Config Server Configuration Allows transmission of still images to remote sites using the FTP server. Set the information

14 File Prefix You may add a file name prefix to the stored image file name. Example: If the file prefix is ‘MVD’, the still image would be saved

15 Effective Period This parameter lets you decide whether to save still images at all hours of the day, or during specific times of the day.

16 4.5.2 Mapping Event Mapping It is possible to define conditions that would cause the camera to respond with certain actions. A triggered event

17 DNS Configuration DNS (Domain Name Server) provides the translation of host names to IP addresses on your network. Primary DNS server Enter

Contents 1. PRODUCT FEATURES ...

18 4.6.2 Service Port Service Port HTTP port The default HTTP port number (80) could be changed to any port within the valid port range (1-65535)

19 4.6.3 E-mail You must turn Notification to ‘On’ and then enter the host names or addresses for your mail servers in the fields provided to enable

20 4.7 System 4.7.1 User When you access the camera, the Configure Root Password dialog box appears. Enter the default user name ADMIN and pass

21 NTP Server Synchronize the time from an NTP server every 60 minutes. Specify the IP address or host name of the NTP server you are using. Local

22 Firmware Update Procedure 1. Save the firmware file to your computer. 2. Go to Setup > System > Maintenance within the camera web browse

23 4.7.4 Information System Information Confirm the system information of the camera: S/W version/Model Name/MAC address/IP address settings.

24 5. Dimensions

25

26

27 Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.)

1 1. Product Features The V992-N is a high performance H.264 network camera, designed for demanding security installations. It delivers crisp, clear

28 Vicon Standard Equipment Warranty Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and workmans

Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-2288 800-645-9116 Fax: 631-951-2288 Vic

2 2. Installation 2.1 Install camera 1) Assemble the mounting tripod (supplied), used when mounting the camera to a wall bracket, onto camera wit

3 3) Select the “Change IP Address” button. The message “Do you want to change IP address?” will display; select “Yes” from the pop-up window. 4) C

4 When you first access the camera you will be asked to download and install an Active X control from the camera to display a Live image.

5 With Web Browser 1. Open the Live View page in your web browser. - Select the Setup tab, and open the Video -> Camera page. - Cl

6 3.1 Video Stream Types Motion JPEG This format uses standard JPEG images in the video stream. These images are then displayed and updated at a r

7 may cause congestion. Although there is a maximum of 10 unicast viewers, note that all multicast users combined count as 1 unicast viewer. RTP/RT